Thursday, July 18, 2013

California Glass Expert Performs a Failure Analysis of Sparkling Liquor Bottle Failures

A bottling line for sparkling drinks was suffering from a high rate of  bottle failures on the bottling line. In addition, several bottles failed on the shelf after bottling. Read Consulting was asked to perform a glass failure analysis to determine the cause of failure of three bottles that had failed "on the shelf". Two of the three bottles were from the same mold cavity, and both failed at the exact same height from the base (2 1/4"). The third bottle failed at 2 1/2" above the base. All three failure origins were the same. All three failures started on the outside of the bottle. All three had "crack arrest lines " near the origin. In addition, All three had no visible mechanical damage to the bottle exterior at the origin.  The presence of the crack arrest line confirms a delayed failure. These factors indicate that the failures are caused by defects caused by the bottle manufacturing process. This is a manufacturing defect that must be corrected by the bottle manufacturer.


Labels: , , , , ,